Owl Horizontal Gel
Manual (5.2mb)

Owl Chameleon
(1.5mb)

Owl Systems
(3.6mb)

Owl Penguin
(1.2mb)

Screen up to 7 Samples on 1 Gel in Less than 5 Minutes. The Owl Pollywog™ horizontal micro gel electrophoresis system is designed for quick restriction fragment analysis. Glass slides, 2" x 3", are used as the gel tray. Thin gels can be poured and formed by surface tension directly on the glass slide. Because the gel is so thin, a complete gel run will last 5 to 10 minutes or gels can be cast and solidified in less than 10 minutes using the available caster. This system is designed for quick rapid screening and can be used to check a few PCR samples before you load a large number of samples on a larger gel, saving time.

Complete System Includes:
• Buffer Chamber
• Lid
• Power Supply Leads
• Casting Tray
• Ten Casting Slides
• 1 Comb: 7 well, 1.5mm Thick
 

B1 EasyCast

Gel Size:

2" (W) x 3" (L)

Footprint:

Buffer Vol:

Catalog No.

Type

Number
of Teeth

Teeth
Thickness

Teeth
Width

Recommended Loading Volumes

0.25 cm

0.50 cm

0.75 cm

1.0 cm

C2-7C

Standard

7

1.0 mm

4.8 mm

4µl

13µl

22µl

31µl

C2-7D

Standard

7

1.5 mm

4.8 mm

5µl

19µl

32µl

46µl

B2 Gel Sample: A 1% SeaKem® Gold agarose gel (BMA Cat. No.. 50150) in 1X TBE, pH 8.2 and 0.5ug/mL ethidium bromide, using an Owl Gel Casting Array with 14 tooth combs.

Samples consisted of 1-10Kb DNA size marker (BMA No. 50471) in the odd wells and a 500bp DNA ladder (BMA Cat. No. 50323) in the even wells. Both sample at a concentration of approximately 25ng/band adjusted for well volume.

The gel was run for approximately 60 minutes at 7V/cm. Data provided by BioWhittaker Molecular Applications, Inc.